background image

Thank you for selecting this CLARKE Power Washer for your cleaning requirements.

This booklet contains important information about its operation and maintenance and
should be read in conjunction with a similar guide produced by the manufacturers of the
engine fitted to this particular unit.

Please read both of these carefully before using the machine.

GUARANTEE

This CLARKE product is guaranteed against faults in manufacture for twelve months from
the date of purchase.

In case it is necessary to make a claim under this scheme, please retain your receipt or
invoice to show when and where your purchase was made.

This guarantee will not be valid if the product is found to have been abused in anyway, or
used otherwise than for its intended purpose.

Under the Terms of this Warranty, any repair or replacement can only be carried out by
Clarke International Limited, or one of our authorised dealers.

Where possible any machine requiring attention should be returned to the dealer from
whom it was purchased. Where this is not appropriate, please contact Clarke International,
Service Department, Tel. 020 8988 7400

This guarantee does not affect your statutory rights.

Engine

Type: ...................................................... Briggs and Stratton

Rating: ................................................... 3.5 HP.

Lubrication: ........................................... SAE15-40 (0.61Ltr).

Fuel/Capacity: ..................................... Petrol/0.9Ltr)

Pump

Max Operating Pressure: ..................... 1160psi  (80 Bar).

Max Flow (Low Pressure): .................... 8.06 l/min.

Max Flow (High Pressure): ................... 7.5 l/min.

Max. Water temp: ................................ 40

0

C.

Hose

Construction: ........................................ Internal hose PE - Nylon Frame external hose PVC.

I/D: .......................................................... 6.35mm (¼”).

Length: ................................................... 6M.

Lance

Type: ...................................................... Two Piece.

Flow Settings: ........................................ High (Fan & Jet) and Low (Fan & Jet).

General

Sound Power Level (Guaranteed ): .. 103dBL

wa.

Weight: .................................................. 22.25kg.

Dimensions: ........................................... LxWxH, 630x494x918mm.

SPECIFICATIONS

-3-

Содержание PLV100LB












Отзывы: