6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ADDITIONAL WARNINGS FOR ROUTERS
a. Never start the router while the bit is touching the workpiece.
b. Ensure the bit has completely stopped before engaging the spindle lock.
c. Do not handle bits immediately after use - they become very hot.
d. Ensure the plunge spring is always fitted when using hand-held.
e. Only use router bits designed for woodwork and suitable for the speed rating of
this router.
f.
Only use bits with a shank diameter exactly matched to the collet(s) supplied
with this router.
g. Extreme care must be taken not to overload the motor when using bits with a
diameter greater then 2" (50mm). Use very slow feed rates and/or multiple
shallow cuts to avoid overloading the motor.
h. Remove the plug from the socket before carrying out any adjustment, servicing
or maintenance.
i.
Fully unwind cable drum extensions to avoid potential overheating.
j.
When an extension cable is required, you must ensure it has the right ampere
rating for your power tool and is in a safe electrical condition.
k.
Always check walls, floors and ceilings to avoid hidden power cables and pipes.
l.
After long working periods external metal parts and accessories could be hot.
m. Handle router bits with care, they can be extremely sharp.
n. Check the bit carefully for signs of damage or cracks before use. Replace
damaged or cracked bits immediately.
o. Always use both handles and make that you have a firm grip on the router
before proceeding with any work.
p. Keep your hands away from the rotating bit.
q. Make sure that the bit is not in contact with the work when you switch the
machine on.
r.
Before using the tool to make a cut, switch on and let it run for a while. Watch for
vibration or wobbling that could indicate an improperly installed bit.
s.
Take notice of the direction of rotation of the bit and the direction of feed.
t.
Always switch off and wait until the bit has come to a complete stand still before
removing the machine from the work piece and also before putting the router
down on the workbench.
u. Ensure that you have removed foreign objects such as nails and screws from the
work before commencing operation.
