Clarke CON2600, Инструкция по эксплуатации и техническому обслуживанию

Страница: 15 / 20

15
MAINTENANCE
CHANGING THE CARBON BRUSHES
1. Remove the screw holding the
brush cover in place.
2. Remove the screw and washer
holding the braid in place.
3. Hold back the spring assembly,
and slide out the carbon brush.
4. Replace with the new brush
supplied.
5. Release the spring assembly and
secure the braid with the screw
remove in step 2.
6. Repeat on the other side of the
body. Both brushes must be
replaced at the same time
CLEANING
• To maintain the best possible performance from your angle grinder,
it must be kept clean.
• To reduce fire hazard, keep the cooling vents free of debris.
• Clean the area around the spindle and mounting washer and keep
the threaded locking washer clean.