1.
1/2" Square Socket Drive
2.
Metal Gear Housing
3.
Ventilation Slots
4.
Forward / Reverse / Neutral Lock Switch
5.
Variable Speed Trigger Switch
6.
Padded Hand Grip
7.
Battery Release Button
8.
Battery Pack
GETTING TO KNOW YOUR IMPACT WRENCH
ROTATION DIRECTION
Your tool is equipped with a 3-position Forward/Reverse/Neutral Switch through
the housing above the trigger (item 4 above). When knob is pushed toward the
right, rotation is forward (clockwise). When pushed in from the right to the left
side, rotation is reversed (anticlockwise), and when in centre position, it is locked
in neutral and the trigger is blocked.
NEVER
push the Forward/Reverse/Neutral Switch until the drive stops turning.
4
ELECTRICAL CONNECTIONS
The Charger is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for
connection to a standard, domestic electrical supply. Should the plug need changing at
any time, ensure that a plug of identical specification is used.
WARNING ! THIS APPLIANCE IS DOUBLE INSULATED
This machine must be wired up in accordance with the following colour code:
BLUE
-
NEUTRAL
BROWN
-
LIVE
•
Connect the BLUE coloured cord to the plug terminal marked “N”
•
Connect the BROWN coloured cord to the plug terminal marked “L”
The fuse in the plug must be replaced with one of the same rating
(5 amps)
and this
replacement must be approved to BS1362.
If in doubt, consult a qualified electrician. Do not attempt any electrical repairs yourself.