background image

EN

ENGLISH

 

Clarke

®

 

 American Sanders

 

 

Operator's Manual (EN) - EZ Sand 

 

 

 

 

                          - 3 - 

 

 

 

 

 

 

       

 

                                          

OPERATOR SAFETY INSTRUCTIONS

 

DANGER:

 

Failure to read the Owner’s Manual prior to operating or servicing your Clarke American Sanders machine could result 
in injury to you or to other personnel;  damage to the machine or to other property could occur as well.  You must have 
training in the operation of this machine before using it.  

If you or your operator(s)  cannot read this manual have it 

explained fully before attempting to operate this machine.  

 

 

DANGER

: Sanding/

fi

 nishing wood 

fl

 oors can create an explosive or combustible environment.  Do not operate this machine around 

solvents, thinners, alcohol, fuels, 

fl

 oor 

fi

 nishes, wood dust or any other 

fl

 ammable materials.  Cigarette lighters, pilot 

lights, electrical sparks and all other sources of ignition should be extinguished or avoided.  Keep work area well venti-
lated.

 

 DANGER

Electrocution could occur if the machine is being serviced while the machine is connected to a power source.  Disconnect 
the power supply before servicing.

 

 

DANGER: 

Electrocution or 

fi

 re could occur if the machine is being operated with a damaged power cord.  Keep the power cord clear 

of the pad.  Always lift the cord over the machine.  Do not move the machine by the power cord.

 

 

DANGER: 

To avoid injury keep hands, feet, and loose clothing away from all moving parts on the machine.  Disconnect the power cord 
before replacing the pad, changing the abrasive, or when servicing.  Do not operate the machine unless all guards are in 
place.  Never leave the machine unattended while connected to a power source.

 

 

DANGER: 

Dust generated from sanding wood 

fl

 oors can spontaneously ignite or explode.  Promptly dispose of any sanding dust in a 

metal container clear of any combustibles.  Do not dispose in a 

fi

 re.

 

 WARNING:

 

This sander is not to be used on pressure treated wood.  Some pressure treated woods contain arsenic and sanding pres-
sure treated wood produces hazardous dust.  Inhaling hazardous dust from pressure treated wood can cause serious injury 
or death.  Sanding pressure treated wood decks or uneven surfaces can damage the sander which is not covered under 
warranty or damage waiver.

 

 

WARNING:

 

This machine should be grounded while in use to protect the operator from electric shock.  This machine is provided with a 
three-conductor cord and a three-contact grounding type attachment plug to 

fi

 t the proper grounding type receptacle.  The 

green (or green and yellow) conductor in the cord is the grounding wire.  Never connect this wire to anything other than the 
grounding pin of the attachment plug.

 

 

WARNING:

 

Shock hazard.  Do not use the machine if it has been rained on or sprayed with water.

 

 

WARNING:

 

Injury can occur if protective clothing or equipment is not used while sanding.  Always wear safety goggles, protective cloth-
ing, and dust mask while sanding.

 

 

WARNING:

 

Any alterations of modi

fi

 cations of this machine could result in damage to the machine or injury to the operator or other 

bystanders.  Alterations or modi

fi

 cations not authorized by the manufacturer voids any and all warranties and liabilities.

THIS MACHINE IS INTENDED FOR COMMERCIAL USE ONLY

   

 DANGER

 means: 

Severe bodily injury or death can occur to you or other personnel if the 

DANGER 

statements found on this machine or in this Owner’s Manual are ignored or are 
not adhered to.  Read and observe all 

DANGER 

statements found in this Owner’s 

Manual and on your machine.

   

 

 

  WARNING

 means:  

Injury can occur to you or to other personnel if the 

WARNING 

statements found on 

your machine or in this Owner’s Manual are ignored or are not adhered to.  Read 
and observe all 

WARNING 

statements found in this Owner’s Manual and on your 

machine.

   

 

 

  CAUTION

 means:  

Damage can occur to the machine or to other property if the 

CAUTION 

statements 

found on your machine or in this Owner’s Manual are ignored or are not adhered to.  
Read and observe all 

CAUTION 

statements found in this Owner’s Manual and on 

your machine.

Содержание American Sanders 07164A







































Отзывы: