Clarke 7640130, Инструкция по эксплуатации и техническому обслуживанию

Страница: 2 / 20

2
INTRODUCTION
Thank you for purchasing this Clarke Pressurised Sandblaster.
Before you try to use this product, read this manual and follow the instructions
carefully. In doing so you will ensure your safety and the safety of others
around you. You can also look forward to a purchase that gives you long and
satisfactory service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
CONSUMABLES
Please be aware that certain parts of this sandblaster will wear, and require
replacing and that these parts may not be covered by your guarantee.
The speed at which certain parts wear depends on the abrasiveness of the
materials used. Replacement parts are available from your nearest Clarke
International dealer.
WHAT IS SUPPLIED
• 1 x Abrasive Tank Assembly
• 2 x Handlebars (with screws, washers and nuts)
• 2 x Wheels and Accessories
• 1 x Wheel Axle
• 1 x Sand Hose
• 1 x Funnel
• 1 x Hood
• 4 x Nozzle (2mm, 2.5mm, 3mm and 3.5mm)
• 1 x Instruction Manual