background image

2

INTRODUCTION

Thank you for purchasing this CLARKE Garage Jack. This manual covers the 
CTJ2250Q and the CTJ2250QM which is supplied in a blow moulded case.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

SPECIFICATIONS

Length (not including handle):

550 mm

Width:

205 mm

Min height of saddle from floor:

135 mm

Max height of saddle from floor:

387 mm

Weight:

12.6 kg

Number of full strokes to maximum height:

5 stroke quick, 12 in total

Oil Capacity:

120 ml

Rated Load:

2.25 tonne

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission.  This guarantee does not effect your 
statutory rights.

Содержание 7623071













Отзывы: