7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INSTALLATION
CONNECT THE HOSE ADAPTOR
1. Insert the Water inlet filter into the
water inlet.
2. Screw the supplied hose adaptor
onto the water inlet by hand as
shown.
• Do not use any tools to tighten
the adaptor.
CONNECT TO A WATER SUPPLY
The pressure washer must never be connected to the drinking water supply
without using a system separator (also known as a backflow preventer).
Always follow the regulations of your local water supplier.
1. Connect a supply hose to the inlet
adaptor.
• We recommend that you use a
push fit quick connector (not
supplied).
• The water supply must be able
to deliver at least 10 l/min with
an inlet temperature between
5°C and 40°C.
CAUTION: WATER THAT HAS FLOWED THROUGH A SYSTEM SEPARATOR IS
CONSIDERED NON-DRINKABLE.
Содержание 7320176
Страница 20: ......
