background image

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Hot Washer.

The machine has been designed to use hot or cold water to clean any 
surfaces which can stand the force of the high pressure water jet and the 
action of the detergents used.

The machine must only be used for the purpose for which it was designed.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase. 

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. 

This guarantee does not effect your statutory rights.

UNPACKING

1. Remove the cardboard box, put two wheels of the machine on the ground 

and remove the pallet.

The following items should be supplied. If any parts are missing or damaged, 
please see your CLARKE dealer.

1 x Pressure Washer

1 x Water Inlet Hose Adaptor

1 x Gun Assembly

1 x Hose Assembly

1 x Lance Assembly

1 x High Pressure Nozzle

Содержание 7320176





















Отзывы: