manualshive.com logo in svg

Clarity SN-4035-WX Bobcat, Руководство пользователя, Страница: 28 / 120

Поделиться
Скачать
Clarity SN-4035-WX Bobcat Скачать руководство пользователя страница 28

18

2.5 Connecting Picture Sources

Digital and analog computer pictures share a common connector

Computer sources

Connect computer pictures to the DVI-I connector. 

This is the standard DVI digital connector, but you 
can convert it to a 15-pin D-sub for analog computer 
pictures with the supplied adapter. 

Computer sources are RGB. Later you will set the 

Colorspace to RGB in the Picture menu. 

Video sources

Connect composite video pictures to the RCA con-

nector. 

Connect S-Video pictures to the S-Video connector. 
Both connectors accept NTSC, PAL or SECAM 

video sources.

If Bay Cat is shipped to a destination outside the US, 
the video inputs are disabled. 

YPbPr sources

Component

 video sources, such as those provided 

by some DVD players, should be connected to the 
15-pin connector (through the adapter on the DVI 
connector). 

Most DVD players have red, green, and blue RCA 

connectors for component video output. There is 
available a cable with three BNC connectors on one 
end (red, green and blue) and a 15-pin connector on 
the other. 

Therefore, to get from a DVD player to a Bay Cat, 

you will need the following parts, listed from DVD to 
Bay Cat:

1. RCA male to BNC female adapter, 3 each
2. Cable with BNC on one end, 15-pin VGA connec-

tor on the other

3. 15-pin to DVI adapter (supplied)

The Colorspace in the Picture menu will be set to 
YPbPr to see the colors correctly. 

Macrovision, a proprietary method of encrypting DVDs 
so they cannot be copied, is not supported for YPbPr 
component sources. It is supported for composite and 
S-Video inputs. If you can’t see a DVD movie, try the 
composite or S-Video outputs of the DVD player. 

YPbPr supports both progressive and interlaced 

scanning. 

It may be necessary to select Analog or Digital in the 
EDID menu. 

Содержание SN-4035-WX Bobcat

























































































































Отзывы:

Нет отзывов