Clarion UNGO ProSecurity S100, Руководство по установке

Страница: 15 / 26

16
menu #2 - advanced features
feature descriptions
The features of the system are described below. Features that have additional settings that can be select-
ed only when programming with the Pro Security Programmer are indicated by the following
icon:
menu #1 - basic features
1-1 ACTIVE/PASSIVE ARMING: When active arming is selected, the system will only arm when the
remote is used. When set to passive, the system will arm automatically 30 seconds after the last door
is closed. To alert the consumer of passive arming, the siren will chirp 20 seconds after the door is
closed. This provides the consumer with an audible indication prior to the system actually arming. At
the 30 second mark, the system will arm but the siren will not chirp.
1-2 Chirps ON/OFF: This feature controls the chirps that confirm the arming and disarming of the system.
1-3 IGNITION CONTROLLED DOOR LOCKS ON/OFF: When turned on, the doors will lock
three seconds after the ignition is turned on (with doors closed) and unlock when the ignition is
turned off. The Pro Security Programmer will display separate steps for ignition lock and ignition
unlock. They can be programmed on or off independently.
Feature One Chirp Two-Chirp
Number Setting Setting
2-1 Siren Horn honk
2-2 30-second siren duration 60-second siren duration
2-3 False alarm prevention Circuitry ON False alarm prevention Circuitry OFF
2-4 Progressive door trigger Instant door trigger
2-5 Override switch input: 1 pulse Override switch input: 2-5 pulses
2-6 Open Zone Bypass Notice ON Open Zone Bypass Notice OFF
2-7 Ignition-controlled domelight ON Ignition-controlled domelight OFF
2-8 Single unlock pulse Double unlock pulse
2-9 Channel 3: Validity Channel 3: latched/latched, reset
with ignition/30-second timed/
second unlock output*
*Second unlock is only available if Feature 2-8 is programmed to single pulse.