Page 12 - MS3001 / MS3200 Installation Manual
Two Car Operation
For your convenience, you may use a single transmitter to operate multiple vehicles. The
Transmitter can be set to arm Car #1 with Button 1 and arm additional cars with the first available
Buttons not being used by Car #1.
The following diagram illustrates how a single transmitter can operate a two-car system.
As stated, the Programming and set-up functions of Car #2’s system
will not be affected by this
Transmitter configuration and will operate exactly as described in this manual.
The following diagram describes how it is possible to control a primary vehicle and a secondary
vehicle using a single Transmitter.
(A) = Car 1
(B) = Car 2
ARM
(A)
ARM
(B)
AUX 1
(A)
MODE
green
MODE
none
BUTTON 1
BUTTON 2
MODE BUTTON
Mode Sequence
install_MS3001.qxd 8/11/99 4:15 PM Page 12
