54 NZ502E/NP402E English
3.1.8 Navigate to a location stored in a photo
You can also set the location stored in a photo as your destination. Do as follows:
1.
If you are on the Map screen, tap
to return to the Navigation
Menu.
2.
In the Navigation Menu, tap
.
3. Open
the
menu and tap
.
4.
The list of photos stored in the device appears. Select one photo from the list.
5.
A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
) appears at the
new location. Tap
to confirm the destination, or tap
to select a different destination.
6.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
to modify route
parameters, or tap
and start your journey.
Note! Only geotagged JPG files contain location information. That is why these kind of
files can only be used in navigation. Other picture files do not appear in the list.
Files must be located on an inserted SD card or USB pendrive, either in the root
folder or in a "pictures" folder.
Содержание NZ502E
Страница 65: ...NZ502E NP402E ...
