DOC ID
– 2021 Rev 01
2 / 14
Installation options
Installation option 1: Desktop
Option 1 uses the included panel tabletop stand.
To desktop mount the panel:
1. Press the kickstand to the rear of the panel in the desired orientation. The
stand pops into place, locking to the panel.
Note:
There are 2 options for tabletop stand orientation. Each option
results in a different viewing angle.
•
Orientation 1:
Insert the stand into the panel with the tail facing
down, creating a downward facing arc. This gives the panel a more
forward-facing view, close to a 60° angle.
•
Orientation 2:
Insert the stand into the panel with the tail facing
upward, creating a curve upward. This gives the panel a more
upward-facing view, close to a 30° angle.
2. Slide a stand grip onto each slot on the stand.
(Optional)
To prevent the panel from sliding, attach the included non-slip
base grips. Place one base grip on each corner of the panel.
