Clam 116611, Руководство пользователя

Страница: 6 / 17

STEP-5
1 . LAY TWO OF THE HOOP POLES TOGETHER ON FLOOR AND ASSEMBLE WITH
FASTENERS AS SHOWN
PLACE HOOP WITH
LIGHT STICK ON TOP.
LIGHT STICK WIRE MUST BE PLACED ON SAME SIDE AS BATTERY HOLDER. THIS
VIEW WILL HAVE THE WIRE TO YOUR RIGHT SIDE WHEN SITTING IN TRAP.
POLES SHOULD MOVE
EASILY, DO NOT OVERTIGHTEN
DO NOT USE NUT
WITH THIS SCREW.
SLIDE CLIP ONTO POLE AND SNAP INTO THE TWO HOLES
LOCATED ON THE HOOP BEFORE ADDING FASTENERS.
INTO
2 . SCREW IN THE PROPER SCREWS INTO PLATE DO NOT OVERTIGHTEN.
3 . WHILE HOLDING THE SCREW IN PLACE START TO THREAD THE NYLOCK NUT ONTO
THE SCREW AND TIGHTEN BY HAND UNTIL RESISTANCE IS FELT. THEN USING 7/16 SOCKET
OR WRENCH CONTINUE TO TIGHTEN NUT UNTIL IT IS EVEN WITH END OF SCREW. DO NOT
OVERTIGHTEN.