Clam 116611, Руководство пользователя

Страница: 14 / 17

Q: What is the proper way to set up and take down my Fish Trap?
Set-Up:
•
Face the seats. Grab the floor hoop pole and pull on it until you feel and hear the RPSX
collar pins engaging in the fully open position. Grab the next hoop and do the same until
all the hoops are fully open. When finished, you should be inside the shelter.
•
Install the roof spreaders, then front spreader, and finally the rear spreader. (Spreader
count varies with shelter style/configuration
– some smaller shelters use only a rear
spreader).
Take-Down:
•
Remove all spreaders - snug the tension knobs after compacting so they
don’t vibrate out
during transit.
•
From inside the shelter, start with the rear wall hoop. Compress both collars and retract
hoop, then the same with next inward hoop, etc. Continue until all upright hoops are
collapsed.
•
Step out of the shelter, disengage the porch hoop collars and swing the porch hoop onto
the previously retracted hoops. Make sure the tent does not catch on the mount
brackets while collapsing the porch hoop.
•
Go around the shelter and tuck the tent material in between the rested hoops the best
you can to keep the tent material from dragging during transit
– a travel cover works
great to help hold everything together.
***Note: Make sure tent material is clear of the canopy brackets to minimize rubbing or possible
tearing.