TEKNO 40 INSTALLATION
INSTRUCTIONS
STEP 1 - Installing Supports
Height calculation for regular clips.
Add 1” to length of drapes, plus at least 1/2” clearence from
the fl oor. This measurement is the distance from fl oor to center
point of Back Plate.
Please note drapes should not touch rail,
install pin on hooks with this in consideration.
M-6 BOLT
COVER PLATE
INSIDE POST
1.
Install Back Plate to wall. Make sure all M-6 bolts are level.
If you have a spliced track the Center Support must be
installed at the position of splice.
2.
Cover Back Plate with Cover Plate.
3.
Screw on Inside Post very securely. Do not leave any play.
STEP 2 - Splice track if necessary
CENTER
SUPPORT
SET SCREWS
SPLICE
STEP 3 - Installing Outside Posts
1.
Join the track sections
together.
2.
Tighten set screws.
3.
Screw Center Support
directly into center hole
of
Splice.
1.
Loosen all screws on Outside Posts.
2.
Slide Ouside Posts into back channel of Rail.
3.
Align Outside Posts with Inside Posts from
Step 1
.
OUTSIDE POST
1
2
3
4
5
1.
Slide Outside Posts over
Inside
Posts.
2.
Once all Outside Posts
including Center Supports
are in place, tighten
posts securely by turning
clockwise.
3.
Tighten set screws.
4.
Finished result for
Center
Supports.
5.
Finished result for
side
posts.
STEP 4 - Mount rail onto supports
OUTSIDE POST
CARRIERS
COVER PLATE
INSIDE POST
BACK PLATE
