manualshive.com logo in svg

Claas ARES 546, Использование и обслуживание, Страница: 37 / 178

Поделиться
Скачать
Claas ARES 546 Скачать руководство пользователя страница 37

ARES 506-606 - 02.2005 - GB

B.13

OTHER CONTROLS AND 
ACCESSORIES

ADJUSTABLE STEERING COLUMN

The height and rake of the steering wheel are adjusted using the 
lever (C).
To change the steering wheel rake, lower lever (C), move the 
steering wheel to the required position and release the lever.
To change the height of the steering wheel, lift lever (C), bring the 
steering wheel to the required position and release the lever.

WINDSCREEN WIPER AND WASHER

The windscreen wiper lever (E) has 3 positions:
- Position 0: Stop.
- Position 1: Intermittent wipe (every 10 seconds).
- Position 2: Continuous wipe.
The windscreen washer is controlled by wheel (F) positioned at 
the end of lever (E). Turn wheel (F) clockwise until there is 
enough washer fluid on the windscreen.

REAR WINDOW WIPER

The rear window wiper switch (A) has 3 positions:
- Position 0: Stop.
- Position 1: Continuous wipe. 
- Position 2: Windscreen washer. 

841hsn01

841hsn02

841hsn03

841hpn15

C

C

E

F

A

Содержание ARES 546



















































































































































































Отзывы:

Нет отзывов