CL-Projects Blue Orb Trilogy, Руководство пользователя

Страница: 13 / 20

12
FEEDB
Feedback : Sends a portion of the output back into the input of the delay line, which creates repeating
echoes. A value of 0 produces one echo, higher values give multiple echoes.
LEVEL
Sets the effect mix going to the main output. Turning the knob completely counterclockwise, turns
the effect off.
MODULATION FX
The modulation effects section contains 3 effects: Chorus, Flanger and Phaser. At the top right corner
of the modulation fx section, you will find 3 switches ‘
CH ’, ‘ FL ’ and ‘ PH ’, ‘ CH ’ stands for ‘ CHORUS ’
‘ FL ’ for ‘ FLANGER ’ and ‘ PH ’ for ‘ PHASER ’. Select the switch of the effect you want to edit. The 3
modulation effects can be used at the same.
CHORUS
The Chorus effect delays the original signal. The delay time is modulated with an LFO. The delayed,
modulated signal is mixed with the original, dry signal. You can use the Chorus effect to enrich
the incoming signal and create the impression that multiple instruments or voices are being
played in unison.
The slight delay time variations generated by the LFO simulate the subtle pitch and timing
differences heard when several musicians or vocalists perform together. Using chorus also adds
fullness or richness to the signal,
and it can add movement to
lowor sustained sounds.
To be able to edit the Chorus
parameters, be sure that the ‘
CH ’
switch is turned on (lights up).
DEPTH
Sets the amount of LFO modulation applied to a signal. Higher amounts result in a stranger chorusing
effect.
SPEED
Sets the speed of the LFO modulating the signal.
PHASE
Sets the phase difference between the two LFO's that drive the left and right stereo channel.
LEVEL
Sets the effect mix going to the main output. Turning the knob completely counterclockwise, turns
the effect off.