CityGrow CG102RS232, Руководство пользователя

Страница: 13 / 24

11
6.1.2 DeviceID
The 3-byte DeviceID is used to specify the identity of the target device in the ZigBee
network.
If the ZigBee devices are configured through the HomeNET planner, the DeviceID of the
target device should be ID (2-byte) + EP (1-byte), which ID and EP please refer to
HomeNET planner. For example:
-
An one-gang dimmer device on the HomeNET planner which ID is assigned to 0001,
the DeviceID for CG102RS232 should be 000101.
-
A two-gang switch device on the HomeNET planner which ID is assigned to 0002,
the DeviceID for CG102RS232 of the first gang should be 000201 and the second
gang should be 000202.
6.1.3 DeviceType
The 1-byte DeviceType is used to specify the device type of the target device. The different
types of device are shown in Table 4-3.
Table 6-3 Identification of device type
DeviceType
Description
Name Code
DEVICE_SWITCH 0x01 Light switch device type
DEVICE_SOCKET 0x02 Power socket device type
DEVICE_DIMMER 0x03 Dimmer light switch device type
DEVICE_CURTAIN 0x04 Curtain control device type
DEVICE_IR 0x05 CG102IR device type