Page 14 of 31
6550 PDS-375 TRX Manual R6.docxx
Neo: 1mW- 72mW (ETSI)
Port Setup
This menu is used to configure the CKDMX Ports for the various fixture types supported. Each
CKDMX Port can be individually configured, or all 6 Ports can be set to the same configuration
.
Start Addressing
(select a starting address for the whole unit with Base Address, or set individual starting
addresses for each Port with Port 1 Address through Port 6 Address)
•
Base Address
–
1-512
•
Port 1 Address
–
1-512
•
Port 2 Address
–
1-512
•
Port 6 Address
–
1-512
Source Selection
(Select Universe in Ethernet control methods
;
select a source for the whole unit with All
Sources, or set individual Sources for each Port with Port 1 Source through Port 6 Source)
–
All Sources
–
Port 1 Source
–
Port 2 Source,
–
Port 6 Source
Personality
(select a common fixture personality for the whole unit with All Personality, or set individual
personalities for each Port with Port 1 Personality through Port 6 Personality)
–
All Personality
–
Port 1 Personality
–
Port 2 Personality
–
Port 6 Personality
Fixture Personalities:
PASS-THRU
iW 8-bit
RGBAW 16-bit
RGBAW 8-bit
RGB5 16-bit
RGB5 8-bit
RGB3 16-bit
RGB3 8-bit
