CITROËN C Zero, Руководство пользователя

Страница: 66 / 136

64
Safety
To secure the child seat to the TOP TETHER:
- pass the child seat strap over the centre of
the vehicle's seat backrest,
- lift the TOP TETHER cover,
- secure the upper strap fixing to the ring B,
- tighten the upper strap.
The incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
Strictly observe the fitting instructions
provided with the child seat.
For information on the possibilities for installing
ISOFIX child seats in your vehicle, refer to the
summary table.
Recommended ISOFIX child
seats
Also consult the installation guide from the
child seat’s manufacturer to find out how
to install and remove the seat.
"RÖMER Baby-Safe Plus and its ISOFIX
base"
(size category: E)
Group 0+: from birth to 13 kg
Installed "rearward facing" using an ISOFIX
base which is attached to rings A.
The base has a height adjustable support leg
that rests on the vehicle's floor.
This child seat can also be secured with a
seat belt. In this case, only the shell is used
and attached to the vehicle seat using the
three-point seat belt.
"RÖMER Duo Plus ISOFIX"
(size category: B1)
Group 1: 9-18 kg
Installed only in the "forward facing" position.
Attached to rings A and upper ring B,
referred to as TOP TETHER, using an upper
strap.
Three seat body angles: sitting, reclining,
lying down.
We recommend the lying down position.
This child seat can also be used on seats
not equipped with ISOFIX mountings. In
this case, it must be secured to the vehicle's
seat by the three-point seat belt. Adjust the
position of the vehicle's front seat so that the
child's feet are not touching the backrest.
https://www.automotive-manuals.net/