CITROEN C4 SpaceTourer, Руководство пользователя

Страница: 218 / 316

216
In the event of a breakdown
Putting the winch carrier and
spare wheel back in place
When the spare wheel is fitted in place of
a wheel with a punctured tyre, the winch
and tool box must be refitted underneath
the vehicle again before restarting.
F
Straighten the wheel.
F
Place the appropriate tools in the box and
close the cover again.
F
Place the tool box on the ground.
F
Pass the connecting piece through the
wheel hub ( A ).
F
Insert the connecting piece into the tool box
hole ( B – C ).
F
Centre and position the spare wheel on the
tool box ( D ).
F
Insert the centring guide into the wheel hub.
F
Place the wheel/box assembly beneath the
rear of the vehicle.
F
Replace the wheel/box assembly beneath
the vehicle by "loosening" the winch control
nut with the wheelbrace and extension.
F
Tighten fully. When the cable is completely
reeled in, turning the nut no longer
encounters resistance.
F
Check that the wheel is properly flattened
against the floor.