Citizen H909 ECO-DRIVE, Краткая инструкция

Страница: 1 / 4

1/4
H909 Abbreviated instruction
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications, and operations, refer to the instruction manual: H909 instruction manual
English
Component identification
LON PAR ATH
RUH
DXB
KHI
DEL
DAC
BKK
BJS
TYO
ADL
SYD NOU
AKL
MDY
HNL
ANC
LAX
DEN
CHI
NYC
SCL
RIO
FEN
PDL
Date indication
Minute hand
24-hour hand
Area name / time
zone
Reception-in-progress indication (RX)
Hour hand
Second hand
Reception result
indication
(OK / NO)
Signal-reception-OFF
indication
Button
B
Button
A
Crown
Function hand
• Day of week
• Summer time setting
(SMT ▼ (On) / ▽ (Off))
• Power reserve
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.
Checking the power reserve
1.
Push the crown in to position
0
.
2.
Press and release the lower right button
A
.
The function hand indicates the power reserve amount.
Level
3 2 1 0
Indication
Duration
(approx.)
2 - 1 year 1 year - 16 days 16 - 10 days
10 days or
shorter
Meaning
Power reserve is
sufficient.
Power reserve is
OK.
Power reserve is
getting low.
Insufficient
charge warning
has started.
OK for normal use Charge immediately
3.
Press and release the lower right button
A
to finish the
procedure.
Checking the reception result of the satellite signal
1.
Push the crown in to position
0
.
2.
Press and release the lower right button
A
.
The tail of the second hand indicates the result of the last reception.
Indication Reception result
OK The reception was successful.
NO The reception failed.
• When the signal reception has been set to OFF following
Turning off the
signal reception (reception OFF)
, the head of the second hand points the
signal-reception-OFF indication.
3.
Press and release the lower right button
A
to finish the
procedure.
Setting the world time
Checking the world time
1.
Push the crown in to position
0
.
2.
Press and release the upper right button
B
.
The second hand moves to point the area currently set.
3.
Press and release the upper right button
B
to finish the
procedure.
• It returns to current time indication automatically in about 10 seconds
without pressing the button.
Crown's position
0 1 2