H01*/H03*/H05*
Abbreviated instruction
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual.
English
[H01*/H05*]
Reception result
indication (NO)
Hour hand
Second hand
Reception result
indication (OK)
Button
A
Crown
Minute hand
Date indication
Reception-in-progress
indication (RX)
[H03*]
Reception result
indication (NO)
Hour hand
Second hand
Reception result
indication (OK)
Button
A
Crown
Minute hand
Reception-in-progress
indication (RX)
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.
Component identification
Crown's position
0 1 2
Checking the power reserve
1.
Push the crown in to position
0
.
2.
Press and release the lower right button
A
.
The second hand moves to indicate the power reserve.
Second hand movement
Power reserve status
Pointing “OK” or “NO” after moving
clockwise
Power reserve is sufficient.
Pointing “OK” or “NO” after moving
counterclockwise
Charge immediately
• “OK” and “NO” indicate the time signal reception result. They have no
relation to the charge level.
3.
Press and release the lower right button
A
to finish the
procedure.
The indication returns to current time.
• It returns to current time indication automatically in about 10 seconds
without pressing the button.
Checking the signal reception result
• This watch receives the time signal from the Japan station every day to adjust
time automatically.
1.
Push the crown in to position
0
.
2.
Press and release the lower right button
A
.
The second hand moves to indicate the result of the last reception.
Indication
Reception result
OK
The reception was successful.
NO
The reception failed.
• Try signal reception following the steps in
if the last reception failed.
3.
Press and release the lower right button
A
to finish the
procedure.
The indication returns to current time.
• It returns to current time indication automatically in about 10 seconds
without pressing the button.
Receiving the signal manually (on-demand reception)
• It takes 2-15 minutes to finish reception.
1.
Push the crown in to position
0
.
2.
Press and hold the lower right button
A
for 2 seconds or more.
The second hand points “RX” and signal reception starts. The second hand
returns to normal movement after finishing reception.
Reception was successful
The time will be updated.
Reception failed
The time is not corrected and the previously set time
resumes.
• Press and hold button
A
until the hands start moving rapidly to cancel
reception.
Crown's position
0 1 2
