G910
Abbreviated instruction
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual: G910 instruction manual
English
Button
B
Button
A
Day-of-week
indication
Second hand
Crown
Date indication
Button
C
Chronograph hour
hand
Hour hand
Chronograph minute
hand
Chronograph
second hand
Minute hand
24-hour hand
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.
Checking the time with chimes
• You can not use this function while using the chronograph.
1.
Push the crown in to position
0
.
2.
Press and hold the upper right button
B
for 2 seconds or more.
Combination of high and low tones of chimes tells you the time of the sub
watch.
• The 3 tones mean “hour”, “quarter of hour” and “minute” as shown below.
• Meaning of the tones
Hight
Length
Meaning
High
Long
“Hour”
Low
Long
“minute”
High-low
combination
two short tones
“quarter of hour”
• Ex.: 4: 36
1
2
3
4
1
2
1
2
3
4
5
6
High
tone
♩ ♩ ♩ ♩
♫
♫
Low
tone
♩ ♩ ♩ ♩ ♩ ♩
Sum
4 o'clock
2 quarters
6 minutes
Time
4 o'clock
36 minutes
To stop the chimes
Press any button.
Component identification
Setting the time and day of week
This watch is equipped with two watches: the main watch and the sub watch.
They control hands shown as follows.
Hands
Main watch
Hour, 24-hour, minute and second hands
Sub watch
Chimes (Chronograph hour and minute hands when
adjusting the time)
1.
Pull the crown out to position
2
when the second hand points
0 second.
The second hand stops and the chronograph hour and minute hands indicate
the hour and the minute of the sub watch respectively.
2.
Rotate the crown to set the day of week of the main watch.
• The hour, minute and 24-hour hands move synchronously.
• Rotate the crown left and right and move the hour hand from PM 10 to
AM 2 to move the day-of-week hand quickly.
3.
Rotate the crown to set the time of the main watch.
• Check whether the time set is AM or PM with the 24-hour hand.
4.
Press and release the lower right button
A
or the upper right
button
B
to adjust the sub watch.
• Each time you press button
B
, the hands move forward by 1 minute; each
time you press the button
A
, they move back by 1 minute.
• They move continuously while you are pressing and holding the button.
• Check whether the time set is AM or PM with the chronograph second
hand.
AM (12 o'clock position)
PM (1 o'clock position)
5.
Push the crown in to position
0
in accordance with a reliable
time source.
The second hand starts moving.
Crown's position
0 1 2
