Citizen 6SA2 Скачать руководство пользователя страница 1

INSTRUCTION MANUAL FOR MIYOTA WATCH MOVEMENT

CALIBRE NO. 6SA2

FUNCTION: CHRONOGRAPH TIMING UP TO 2 HOURS 59 MINUTES 59 SECONDS

                  (CENTER SECOND HAND, 1/20 SEC, MINUTE HAND)                            
BATTERY: SR927SW

A) DISPLAYS AND BUTTONS

B) SETTING THE TIME

C) SETTING THE DATE

D) USING THE CHRONOGRAPH

E) CHRONOGRAPH RESET (INC. AFTER REPLACING BATTERY)

A) DISPLAYS AND BUTTONS

B) SETTING THE TIME

1. Pull the crown out to the 2nd Click Position.
2. Turn the crown clockwise to set hour and minute hands.  
3. After the time has been set, push the crown back to the Normal position.

C) SETTING THE DATE

1. Pull the crown out to the 1st Click Position.
2. Turn the crown clockwise to set the date.

* If the date is set between the hours of around 9:00 PM and 3:00 AM, the date may not change on
  the following day.

3. After the date has been set, push the crown back to the Normal position.

UNIVERSAL MASTERPIECE BORN IN JAPAN

MADE IN JAPAN

METAL MOVEMENT

Chronograph 
second hand 

Button A 

Button B 

Minute hand 

Chronograph  
Hour hand 

2nd Click Position 

1st Click Position 

Normal Position 

Normal second hand 

Chronograph 
minute hand 

Hour hand 

Chronograph 

 retrograde  

1/20 sec. hand  

Содержание 6SA2

Страница 1: ...ands 3 After the time has been set push the crown back to the Normal position C SETTING THE DATE 1 Pull the crown out to the 1st Click Position 2 Turn the crown clockwise to set the date If the date is set between the hours of around 9 00 PM and 3 00 AM the date may not change on the following day 3 After the date has been set push the crown back to the Normal position UNIVERSAL MASTERPIECE BORN I...

Страница 2: ...d hands return to their Zero positions E CHRONOGRAPH RESET INCL AFTER REPLACING BATTERY This procedure shoud be performed when the chronograph second hand does not return to the Zero position 1 Pull the crown out to the 2nd Click Position 2 Press the button A once to set the chronograph second hand to the Zero position 3 Press the button B once to set the chronograph 1 20 second hand to the Zero p...

Страница 3: ... C D 计时功能的使用方法 E A B 1 2 3 C 1 2 3 诞生于日本的惊世杰作 日本制造 金属机芯 时间的设定方法 轻拉柄轴到二档位置 转动柄轴设置时针和分针 时间设定后 请将柄轴推回到正常档位 日历的设定方法 轻拉柄轴到一档位置 转动柄轴设置日历 如果在晚上9点至凌晨3点之间进行日历调整时 次日有可能不换历 日历设定后 请将柄轴推回到正常档位 计时表针归零处理 包括更换电池后 显示幕和按钮 显示幕和按钮 时间的设定方法 日历的设定方法 计时大秒针 按钮 A 按钮 B 分针 计时时针 2档位置 1档位置 正常档位 飞返计时1 20秒针 小秒针 计时分针 时针 ...

Страница 4: ...在开始计 时后 计时1 20秒针会连续运针30秒 然后停止在零位置 计时功能的使用 按压A按钮 设置计时大秒针到零位置 按压B按钮 设置计时1 20秒针到零位置 按压A或B按钮一次 计时大秒针或1 20秒针行走一步 按动A按钮开始计时 按动A按钮启动计时开始或停止 按动B按钮 计时指针 计时大秒针 分针及1 20秒针 回归到零位置 设置 计时 停止 当连续按压A或B按钮时 计时表针能快速行针 一旦指针归到零位置 重设时间 把柄轴推回到正常位置 计时表针归零处理 包括更换电池后 当计时表针不能回归到零位置时或电池重新更换后 必须重新进行计时表针归零 设置 轻拉柄轴到二档位置 ...

Отзывы: