37
1764 Version 1.00
©CITEL Technologies Ltd 2004
Installation of Telecommunications Wiring
Telecommunications wiring to this product must conform to all applicable local safety and electrical
wiring regulations.
Use caution when installing or modifying telephone lines.
Do not install telephone wiring during a lightning storm.
Do not install a telephone jack in wet locations unless the jack is specifically designed for wet
locations.
Do not touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
Any connection of the assemblies listed below to an outside plant lead, an off-
premise application, or any other exposed plant application may result in one or more
of the following: fire, shock hazard, defective operation and/or equipment damage –
•
Restricted peripheral interface circuit
•
Nortel telephone circuits
•
Ethernet circuits
Symbols
These symbols appear on the product.
The lightning flash with arrowhead symbol, within an equilateral triangle, indicates an
uninsulated “dangerous voltage” within the product’s enclosure that may present a significant
risk of electric shock
The exclamation point within an equilateral triangle indicates that important operating and
maintenance (servicing) instructions are included in the literature accompanying the product
The ground symbol within a circle identifies the terminal to be connected to an external
protective conductor. Connect this terminal to earth ground before you make any other
connections to the equipment
