Cisco WRT54GL, Быстрое руководство по установке

Страница: 125 / 563

Chapter 3
Advanced Configuration
19
Wireless-G Broadband Router
Priority Select High or Low in the Priority column. The
Router’s four ports have been assigned low priority by
default.
Flow Control If you want the Router to control the
transmission of data between network devices, select
Enabled . To disable this feature, select Disabled . Ethernet
Port Priority QoS does not require support from your ISP
because the prioritized ports LAN ports 1-4 are in your
network. This feature is enabled by default.
Application Priority
Application Priority QoS manages information as it is
transmitted and received. Depending on the settings of
the
QoS screen, this feature will assign information a high
or low priority for the applications that you specify.
Optimize Gaming Applications Select this to
automatically allow common game application ports
to have a higher priority. These games include, but are
not limited to:
Counter-Strike
,
Half-Life
,
Age of Empires
,
Everquest
,
Quake2
/
Quake3
, and
Diablo II
. The default
setting is unselected.
Application Name
Enter the name you wish to give the
application in the Application Name field.
Priority
Select
High
or
Low
to assign priority to the
application. The default selection is
Low
.
Specific Port #
Enter the port number for the
application.
Wireless QoS
WMM Support
Wi-Fi Multimedia (WMM), formerly
known as Wireless Multimedia Extensions (WME), is
a Wi-Fi Alliance certified feature, based on the IEEE
802.11e standard. This feature provides QoS to wireless
networks. It is especially suitable for voice, music and
video applications; for example, Voice over IP (VoIP), video
streaming, and interactive gaming. If you have other
devices on your wireless network that support WMM,
select
Enabled
. Otherwise, keep the default,
Disabled
.
No Acknowledgement
This feature prevents the Router
from re-sending data if an error occurs. To use this feature,
select
Enabled
. Otherwise, keep the default setting,
Disabled
.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Administration > Management
The Administration > Management screen allows the
network’s administrator to manage specific Router
functions for access and security.
Administration > Management
Router Password
Local Router Access
Router Password
Enter a new Password for the Router.
Re-enter to confirm
Enter the Password again to confirm.
Web Access
Access Server HTTP (HyperText Transport Protocol) is
the communications protocol used to connect to servers
on the World Wide Web. HTTPS uses SSL (Secured Socket
Layer) to encrypt data transmitted for higher security.
Select
HTTP or HTTPS. The default selection is HTTP .
Wireless Access Web If you are using the Router in
a public domain where you are giving wireless access
to your guests, you can disable wireless access to the
Router’s web-based utility. You will only be able to access
the web-based utility via a wired connection if you disable
the setting. Keep the default,
Enable , to enable wireless
access to the Router’s web-based utility, or select Disable
to disable wireless access to the utility.
Remote Router Access
Remote Management To access the Router remotely,
from outside the network, select Enable .
Management Port Enter the port number that will be
open to outside access. You will need to enter the Router’s
password when accessing the Router this way, as usual.
Use https To require the use of HTTPS for remote access,
select this feature.
UPnP
UPnP
Keep the default,
Enable
to enable the UPnP
feature; otherwise, select
Disable
.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.