Cisco WRT54GL, Быстрое руководство по установке

Страница: 119 / 563

Chapter 3
Advanced Configuration
13
Wireless-G Broadband Router
RADIUS
This option features WEP used in coordination with a
RADIUS server. (This should only be used when a RADIUS
server is connected to the Router.)
Security Mode > RADIUS
IMPORTANT: If you are using WEP encryption,
always remember that each device in your
wireless network MUST use the same WEP
encryption method and encryption key, or else
your wireless network will not function properly.
RADIUS Server Address Enter the IP Address of the
RADIUS server.
RADIUS Port Enter the port number of the RADIUS
server. The default value is 1812 .
Shared Key Enter the key shared between the Router
and the server.
Default Transmit Key Select a Default Transmit Key
(choose which Key to use). The default is 1 .
WEP Encryption Select a level of WEP encryption,
64 bits 10 hex digits or 128 bits 26 hex digits . The
default is 64 bits 10 hex digits .
Passphrase Enter a Passphrase to automatically generate
WEP keys. Then click Generate .
Key 1-4 If you did not enter a Passphrase, enter the WEP
key(s) manually.
WEP
WEP is a basic encryption method, which is not as secure
as WPA.
Security Mode > WEP
Default Transmit Key Select a Default Transmit Key
(choose which Key to use). The default is 1 .
WEP Encryption Select a level of WEP encryption, 64 bits
10 hex digits or 128 bits 26 hex digits . The default is
64 bits 10 hex digits .
Passphrase Enter a Passphrase to automatically generate
WEP keys. Then click Generate .
Key 1-4 If you did not enter a Passphrase, enter the WEP
key(s) manually.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Wireless > Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses of
the wireless devices transmitting within your network’s radius.
Wireless > Wireless MAC Filter
Wireless MAC Filter
Wireless MAC Filter To filter wireless users by MAC Address,
either permitting or blocking access, click Enable . If you do
not wish to filter users by MAC Address, keep the default
setting,
Disable .
Prevent Select this to block wireless access by MAC
Address. This button is selected by default.
Permit Only Select this to allow wireless access by MAC
Address. This button is not selected by default.