D15362.16 DX70 and DX80 Administrator Guide CE9.13, JUNE 2020.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
194
Cisco Webex DX70 and DX80
Administrator Guide
Show/hide call details
Click the information button to show details about the
call.
Click the button again to hide the information.
Place a call using the web interface
Sign in to the web interface and navigate to
Call Control
.
Hold and resume a call
Use the
button next to a participant’s name to put
that participant on hold.
To resume the call, use the
button that is present
when a participant is on hold.
(page 1 of 2)
Send DTMF tones
Click to open a key pad that you can use if your application
requires DTMF (dual-tone multi-frequency) signaling.
Place a call
Even if the web interface is used to initiate the call, it is
the video conferencing device (display, microphones and
loudspeakers) that is used for the call; it is not the PC
running the web interface.
1. Navigate the
Favorites,
Directory
or
Recents
lists to find the
correct entry; or enter one or more characters in the
Search
or Dial
field
*
. Click the correct contact name.
2. Click
Call
in the contact card.
Alternatively, enter the complete URI or number in the
Search and
Dial
field. Then click the
Call
button that appears next to the URI
or number.
*
When searching, matching entries from the
Favorites,
Directory
and
Recents
lists will be listed as you type.
End a call
If you want to terminate a call, click
Disconnect all
or
the
button.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices
Appendices
