Cisco Webex 800 Series Скачать руководство пользователя страница 127 | Manualshive

Страница: 127 / 130

background image

• Cellular Telecommunications Association at

http://www.wow-com.com

General RF Exposure Compliance

This device has been evaluated and found compliant to the ICNIRP (International Committee on Non-Ionizing
Radiation Protection) limits for Human Exposure of RF Exposure.

Part 15 Radio Device

The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency.
Any changes or modification to said product not expressly approved by Cisco, including the use of non-Cisco
antennas, could void the user’s authority to operate this device.

Caution

Compliance Statements for Canada

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device. Privacy of communications
may not be ensured when using this phone.

This product meets the applicable Innovation, Science and Economic Development Canada technical
specifications.

Avis de Conformité Canadien

Cet appareil est conforme aux normes RSS exemptes de licence RSS d’Industry Canada. Le fonctionnement
de cet appareil est soumis à deux conditions : (1) ce périphérique ne doit pas causer d'interférence et (2) ce
périphérique doit supporter les interférences, y compris celles susceptibles d'entraîner un fonctionnement non
souhaitable de l'appareil. La protection des communications ne peut pas être assurée lors de l'utilisation de ce
téléphone.

Le présent produit est conforme aux spécifications techniques applicables d'Innovation, Sciences et
Développement économique Canada.

Canadian RF Exposure Statement

THIS DEVICE MEETS THE LIMITS AS REFERENCED BY ISED RSS-102 R5 FOR EXPOSURE TO
RADIO WAVES

Your device includes a radio transmitter and receiver. It is designed not to exceed the General populace
(uncontrolled) limits for exposure to radio waves (radio frequency electromagnetic fields) as referenced in
RSS-102 which references Health Canada Safety Code 6 and include a substantial safety margin designed to
assure the safety of all persons, regardless of age and health.

As such the systems are designed to be operated as to avoid contact with the antennas by the end user. It is
recommended to set the system in a location where the antennas can remain at least a minimum distance as
specified from the user in accordance to the regulatory guidelines which are designed to reduce the overall
exposure of the user or operator.

The device has been tested and found compliant with the applicable regulations as part of the radio certification
process.

Cisco Webex Wireless Phone 800 Series User Guide

117

Product Safety and Security

General RF Exposure Compliance

«
...
125
126
127
128
129
...
»

Содержание Webex 800 Series



































































































































Отзывы:

Нет отзывов

Похожие инструкции для Webex 800 Series

Бренд: Centrios Страницы: 13

Memory Phone 9825

Бренд: Interquartz Страницы: 16

Бренд: BT Страницы: 64

Бренд: Alcatel Страницы: 64

Бренд: Trident Voice Страницы: 2

Бренд: LG Страницы: 84

Бренд: SS Telecoms Страницы: 14

DTerm Series 80

Бренд: NEC Страницы: 2

Бренд: SpectraLink Страницы: 18

Commander N1236

Бренд: Telecom Australia Страницы: 203

Бренд: Samsung Страницы: 25

Бренд: Samsung Страницы: 25

Бренд: Samsung Страницы: 46

Бренд: Samsung Страницы: 40

Office DECT 8000

Бренд: Samsung Страницы: 74

Бренд: Samsung Страницы: 121

Бренд: Samsung Страницы: 115

Бренд: Samsung Страницы: 186

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды