Cisco Wap581, Руководство администратора

Страница: 46 / 134

keys or passwords must be defined. By default, users of this group have read and write access to the
default all MIB view.
The default groups RO and RW cannot be deleted. The WAP device supports a maximum of eight groups. Note
To add and configure the SNMP group, perform the following steps:
Step 1
Select Management > SNMP Settings > SNMPv3 .
Step 2 Click ✚ to add a new row to the SNMPv3 Groups table.
Step 3 Check the box for the new group and configure the following parameters:
• Group Name — Enter the name of the group. The default group names are RO and RW. Group names can contain
up to 32 alphanumeric characters.
• Security Level — Choose the security level for the group, from the following options:
• noAuthNoPriv — No authentication and no data encryption (no security).
•
authNoPriv
— Authentication, but no data encryption. With this security level, users send SNMP messages
that use the SHA key or password for authentication, but not a DES key or AES128 for encryption.
• authPriv — Authentication and data encryption. With this security level, users send the MD5 key or password
for authentication and a DES for encryption. For groups that require authentication, encryption, or both, you
must define the SHA, DES and AES128 keys or passwords on the SNMP Users page.
• Write Views — Choose the write access for the group's MIBs from one of the following options:
• view-all — The group can create, alter, and delete MIBs.
• view-none — The group cannot create, alter, or delete MIBs.
•
Read Views
— Choose the read access to MIBs for the group, from one of the following options:
•
view-all
— The group is allowed to view and read all MIBs.
• view-none — The group cannot view or read MIBs.
Step 4 Click
Apply
to add the group to the SNMPv3 Groups list.
To delete a group, check the group in the list and click
Delete
. To edit a group, check the group in the list and
click
Edit
.
Note
SNMPv3 Users
Use the SNMP Users table to define users, associate a security level to each user, and configure the security
keys per user.
Cisco WAP581 Wireless-AC/N Dual Radio Access Point with 2.5GbE LAN Administration Guide
36
System Configuration
SNMPv3 Users