Cisco WAP300N, Руководство пользователя

Страница: 144 / 660

21
Setting Up: Advanced
Linksys WAP300N
How to change the password
You can change the WAP300N’s password to limit access to the browser-based
utility
To change the password:
1.
Log into the browser-based utility (see “How to open the browser-based
utility” on page 8)
2. Click the Administration tab, then click the Management page
3.
Enter the new password in the
Device Password
field, then enter it again
in the
Re-enter to confirm
field
4.
Click
Save Settings
How to change the idle timeout
You are automatically logged out of the browser-based utility after a period of
inactivity You can set the length of the inactive period
To change the idle timeout:
1.
Log into the browser-based utility (see “How to open the browser-based
utility” on page 8)
2. Click the Administration tab, then click the Management page
3.
Enter the new timeout period in the
Idle Timeout
field You can enter a
range of 60 to 3,600 seconds
4.
Click
Save Settings
to apply your changes
How to disable wireless admin access
For additional security, you can disable the ability to wirelessly log into the
browser-based utility With wireless access disabled, to run the browser-based
utility you must use a wired connection
To disable wireless admin access:
1.
Log into the browser-based utility (see “How to open the browser-based
utility” on page 8)
2. Click the Administration tab, then click the Management page
3.
For Access via Wireless , select
Disabled
, then click
Save Settings
How to change the browser-based
utility’s language
To change the browser-based utility’s language:
Setup > Basic Setup
1.
Log into the browser-based utility (see “How to open the browser-based
utility” on page 8) The Basic Setup page opens
2. For Language , select the language, then click Save Settings