Safety Instructions
Water and Moisture
•
Do not operate the apparatus under or near water – for
example near a bathtub, kitchen sink, or laundry tub, in a
wet basement, near a swimming pool or in other areas with
high humidity.
•
Do not touch the product with wet hands.
Cleaning
•
Unplug the apparatus from communication lines, mains
power-outlet or any power source before cleaning or
polishing. Do not use liquid cleaners or aerosol cleaners.
Use a lint-free cloth lightly moistened with water for
cleaning the exterior of the apparatus.
•
Unplug the apparatus from communication lines before
cleaning or polishing. Do not use liquid cleaners or aerosol
cleaners. Use a lint-free cloth lightly moistened with water
for cleaning the exterior of the apparatus.
Ventilation
•
Do not block any of the ventilation openings of the
apparatus. Never cover the slots and openings with a cloth
or other material. Never install the apparatus near heat
sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
•
Do not place the product in direct sunlight or close to a
surface directly heated by the sun.
Lightning
Never use this apparatus, or connect/disconnect
communication cables or power cables during lightning
storms.
Dust
Do not operate the apparatus in areas with high concentration
of dust.
Vibration
Do not operate the apparatus in areas with vibration or place it
on an unstable surface.
Power Connection and Hazardous Voltage
•
The product may have hazardous voltage inside. Never
attempt to open this product, or any peripherals connected
to the product, where this action requires a tool.
•
This product should always be powered from an earthed
power outlet.
•
Never connect attached power supply cord to other
products.
•
In case any parts of the product has visual damage never
attempt to connect mains power, or any other power
source, before consulting service personnel.
•
The plug connecting the power cord to the product
power supply serves as the main disconnect device for
this equipment. The power cord must always be easily
accessible.
•
Route the power cord so as to avoid it being walked on or
pinched by items placed upon or against it. Pay particular
attention to the plugs, receptacles and the point where the
cord exits from the apparatus.
•
Do not tug the power cord.
•
If the provided plug does not fit into your outlet, consult an
electrician.
•
Never install cables, or any peripherals, without first
unplugging the device from it’s power source.
•
Always use the power supply (AC–DC adapter) provided
with this product.
•
Replace only with power supply (AC–DC adapter) specified
by TANDBERG.
•
Never connect the attached power supply (AC–DC
adapter) to other products.
Servicing
•
Do not attempt to service the apparatus yourself as
opening or removing covers may expose you to dangerous
voltages or other hazards, and will void the warranty. Refer
all servicing to qualified service personnel.
•
Unplug the apparatus from its power source and refer
servicing to qualified personnel under the following
conditions:
•
If the power cord or plug is damaged or frayed.
•
If liquid has been spilled into the apparatus.
•
If objects have fallen into the apparatus.
•
If the apparatus has been exposed to rain or moisture
•
If the apparatus has been subjected to excessive shock by
being dropped.
•
If the cabinet has been damaged.
•
If the apparatus seems to be overheated.
•
If the apparatus emits smoke or abnormal odor.
•
If the apparatus fails to operate in accordance with the
operating instructions.
Accessories
Use only accessories specified by the manufacturer, or sold
with the apparatus.
Communication Lines
Do not use communication equipment to report a gas leak in
the vicinity of the leak.
18
Video Switch
User guide
D14794.02 Video Switch User Guide, October 2012
© 2011-2012 Cisco Systems, Inc. All rights reserved.
www.cisco.com