Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
8
Camera guide
Precision 40 Camera*
Only available as a part of th Cisco TelePresence SX20 Quick
Set.
Spare PID: CTS-PHD1080P4XS2=
HDMI and camera control
Video Out
• HDMI is the video out source.
• The maximum resolution is 1080p60.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Daisy chain control is not supported. The camera can be used
in a chain of multiple cameras, but only as the last camera in
the chain.
Power
• When the camera is used with a Cisco codec, power is
supplied through the Camera control cable.
• When the camera is used with non-Cisco codecs, you
may have to connect the power separately.
USB
For future use.
Kensington lock
The Kensington lock may be used to prevent the camera being
moved from its place or to prevent theft.
*Formerly PrecisionHD Camera 1080p4x S2
The LED is lit during a call.
The LED is continuously lit when the
system is in use. It flickers when the
system receives signals from the remote
control and blinks when rebooting. The
LED pulsates when the system is in
Standby mode.
USB
HDMI Video out,
camera control and
power
Power
supply
Kensington lock
Pulsating
–——– ——– ——–
Blinking
— — — — — — — —
Flickering
•••••••••••••••••••••••••
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Physical Interface
