Cisco Unified IP Conference Phone 8831 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 88

Cisco Unified IP Conference Phone 8831 Скачать руководство пользователя страница 58

• Enter the call forward target number exactly as you would dial it from the conference station. For example,

enter an access code or the area code, if necessary.

• Call forwarding is line specific. If a call reaches you on a line where call forwarding is not enabled, the

call rings as usual.

• For more details about the following configurable call forward options, contact your system administrator:

• Allow calls placed from the call forward target number to the conference station to ring through,

rather than be forwarded.

• Prevent you from creating a call forward loop or exceeding the maximum number of links in a call

forwarding chain.

Forward Calls

Procedure

Step 1

Press

Fwd All

.

Step 2

Enter the target phone number.

Depending on how your voicemail system is set up, you may be able to press

Msgs

to forward all calls to

voicemail.

A visual confirmation displays on the screen while call forwarding is active.

Step 3

To cancel call forwarding, press

Fwd OFF

.

Step 4

To forward calls remotely or to set conditions on fall forwarding, go to your Cisco Unified Communications
Manager Self Care Portal.

Call Park

Call Park allows you to use the conference station to park (temporarily store) a call. The parked call can be
retrieved from another phone in the Cisco Unified Communications Manager system, such as a phone at a
coworker’s desk or in a conference room.

You retrieve a parked call by entering the parking number for the call into another phone in the Cisco Unified
Communications Manager system.

Your system administrator sets up the parking number for the conference station.

Park Call

Procedure

Step 1

During a call, press the

Park

.

Cisco Unified IP Conference Phone 8831 and 8831NR User Guide for Cisco Unified Communications Manager

48

Calling Features

Forward Calls

«
...
56
57
58
59
60
...
»

Содержание Unified IP Conference Phone 8831

























































































Отзывы:

Нет отзывов