Cisco Unified 7905G, Руководство администратора

Страница: 131 / 238

8-13
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
Chapter 8 Profile and Web Page Parameters and Defaults
Call Preference Parameters
Call Preference Parameters
Table 8-4 describes the call preference parameters that you can configure through
a phone’s profile or through the Call Preferences area on the phone’s web page.
These parameters specify various user features on the phone, and specifies which
parameters appear and which options can be configured on a phone’s Call
Preference menu.
Tip To access the Call Preferences area directly from a web browser, enter
IP_address/CallPrefConfiguration, where IP_address is the IP address of your
Cisco IP Phone.
DialPlan Dial plan rules. No syntax check is performed by the implementation. The
administrator must ensure that the dial plan is syntactically valid.
See the “DialPlan Parameter Detail” section on page 8-38 for syntax and usage
details.
Value type: Alphanumeric string, up to 199 characters.
Default value: *St4-|#St4-|911|1>#t8.r9t2-|0>#t811.rat4-|^1t4>#.-
IPDialPlan Allows for detection of IP-like destination addresses in the dial plan:
• 1=If two periods (.) are detected, assume that this is an IP address.
•
2=If three periods (.) are detected, assume that this is an IP address.
Value type: Integer.
Default value: 1
Table 8-2 SIP Parameters (continued)
Parameter Description