Cisco Unified 7905G, Руководство администратора

Страница: 123 / 238

8-5
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
Chapter 8 Profile and Web Page Parameters and Defaults
Network Parameters
StaticIP Internet Protocol (IP) address of the phone. You can use this parameter to
assign the IP address if DHCP does not provide it.
If you assign an IP address with this parameter, you must also assign a default
router and a subnet mask. See the StaticRoute and the StaticNetMask
parameters in this table.
This parameter is ignored if the Dchp parameter is set to 1.
Value type: IP address.
Default value: 0.0.0.0
StaticRoute Static IP address of the network gateway. You can use this parameter to assign
the IP address if DHCP does not provide it.
This parameter is ignored if the Dchp parameter is set to 1.
Value type: IP address.
Default value: 0.0.0.0
StaticNetMask Subnet mask used by the phone. You can use this parameter to assign the
subnet mask if DHCP does not provide it.
If you assign a Subnet Mask address with this parameter, you must also assign
an IP address and a default router for the phone. See the StaticIP and the
StaticRoute parameters in this table.
This parameter is ignored if the Dchp parameter is set to 1.
Value type: IP address.
Default value: 0.0.0.0
Domain Domain name of the phone.
If set to 0, the phone will use the domain name supplied by the DHCP server.
Value type: Alphanumeric string, up to 31 characters.
Default value: 0
Table 8-1 Network Parameters (continued)
Parameter Description