Cisco TelePresence MX700 Скачать руководство пользователя страница 146

Страница: 146 / 241

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.

146

Cisco TelePresence MX700 and MX800

API Reference Guide

xCommand Provisioning ExtensionMobility Login

with a user name (UserId) and pin code (Pin). The user name and pin code are set up in CUCM.

CUCM also supports multiple profiles for a user.
If you, for a user that has multiple profiles, submit a login command with only user name and

pin code, CUCM will send a list of available profiles back to the video system. Then the video

system will create corresponding ExtensionMobilityProfileSelection Profile events, so that a

new login command, which contains the Profile parameter in addition to the user name and pin

code, can be submitted.

Requires user role: ADMIN, USER

USAGE:

xCommand Provisioning ExtensionMobility Login UserId: "

UserId

" Pin: "

Pin

[Profile: "

Profile

where

UserId:

String (1, 255)

A valid user name, as set up in CUCM.

Pin:

String (1, 255)

A valid pin code for the user, as set up in CUCM.

Profile:

String (1, 255)

A valid profile for the user, as set up in CUCM. This parameter applies only if the user

has multiple profiles.

xCommand Provisioning ExtensionMobility Logout

This command will log you out of your Extension Mobility profile.

Requires user role: ADMIN, USER

USAGE:

xCommand Provisioning ExtensionMobility Logout

Proximity commands

xCommand Proximity Services Activate

Reactivate the Proximity services that were deactivated with xCommand Proximity Services

Deactivate.

Requires user role: ADMIN, USER

USAGE:

xCommand Proximity Services Activate

xCommand Proximity Services Deactivate

This command deactivates all proximity services on the endpoint. To reactivate proximity

services use the command xCommand Proximity Services Activate.

Requires user role: ADMIN, USER

USAGE:

xCommand Proximity Services Deactivate

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus



xCommand

Содержание TelePresence MX700


















































































































































































































































Результаты поиска

Содержание TelePresence MX700

Отзывы:

Похожие инструкции для TelePresence MX700

Бренды по названию

Популярные бренды

Cisco TelePresence MX700, Справочное руководство

Результаты поиска

Содержание TelePresence MX700

Отзывы:

Похожие инструкции для TelePresence MX700

Бренды по названию

Популярные бренды