Cisco
TelePresence
ISDN
Link
Administrator
Guide
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
16
Configuration examples
use the search option on the page to find the parameters, or
choose from the list of menus to the left and then navigate to the
parameters in the right pane.
Example with support for External Network
Set the net type:
H320 > General Settings > Nettype: external
Set the call control protocol:
externalNetwork > Interface 1 > CallControl: RS366
Set the clocking mode:
externalNetwork > Interface 1 > Clocking: Dual
If using RS530, set the DtRPulse to on; else set to off:
externalNetwork > Interface 1 > DtrPulse: on
Check the status after configuration
Go to
Configuration > Peripherals
and check the ISDN status
information to confirm there are no errors before proceeding. If
there are any errors, or if the power LeD is red, please check your
configuration.
Navigate to H320 > General Settings >
Nettype.
Set the H320 Net type:
• external
Click the
Save
button.
Navigate to externalNetwork > Interface 1.
Set the call control protocol:
• CallControl: RS366
Set the clocking:
• Clocking: Dual
Set the DtR pulse:
• DtRPulse: on/off
Click the
Save
buttons.
Contents
Introduction
Getting started
Software upgrade
Status information
System settings
Appendices
Getting started
