Cisco Sx350, Руководство CLI

Страница: 670 / 1323

IPv6 First Hop Security
669 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
29
29.45 ipv6 neighbor binding logging
To globally enable the logging of Binding table main events, use the ipv6 neighbor
binding logging command in Global Configuration mode. To disable this feature,
use the no form of this command.
Syntax
ipv6 neighbor binding logging
no ipv6 neighbor binding logging
Parameters
N/A
Default Configuration
Binding table events are not logged.
Command Mode
Global Configuration mode
User Guidelines
This command enables the logging of the following Binding table events:
•
An entry is inserted into the Binding table.
•
A Binding table entry was updated.
•
A Binding table entry was deleted from the Binding table.
•
A Binding table entry was not inserted into the Binding table, possibly
because the maximum number of entries has been reached or because of
Binding table overflow.
Example
The following example shows how to enable Binding table event logging:
switchxxxxxx(config)# ipv6 neighbor binding logging