Cisco Sx350, Руководство CLI

Страница: 669 / 1323

IPv6 First Hop Security
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 668
29
Example
In the following example, the Neighbor Binding policy policy1 is attached to VLAN
100:
switchxxxxxx(config)# interface vlan 100
switchxxxxxx(config-if)# ipv6 neighbor binding attach-policy policy1
switchxxxxxx(config-if)# exit
29.44 ipv6 neighbor binding lifetime
To globally change the default of the Neighbor Binding table entry lifetime, use the
ipv6 neighbor binding lifetime command in Global Configuration mode. To return to
the default setting, use the no form of this command.
Syntax
ipv6 neighbor binding lifetime value
no ipv6 neighbor binding lifetime
Parameters
•
value
—The lifetime in minutes. The range is from 1 through 60 minutes.
Default Configuration
5 minutes
Command Mode
Global Configuration mode
User Guidelines
Use the ipv6 neighbor binding lifetime command to change the default lifetime.
Example
The following example changes the lifetime for binding entries to 10 minutes:
switchxxxxxx(config)# ipv6 neighbor binding lifetime 10