Cisco StadiumVision SV-4K Скачать руководство пользователя

Страница: 18 / 76

Table 9. Error (Err) LED Descriptions

Error LED

(number of

flashes)

Description

Unspecified error.

Device is in network recovery mode and using DHCP Option 43 to contact Cisco
StadiumVision Director for provisioning.

No upgrade file found.

Failed to load kernel module.

OS initialization failed (Init shell script failed).

Board is not capable of running the current firmware version.

A piece of on-board hardware is not working correctly.

Problem related to storage device (USB or SD card). (Not applicable in Release 4.0)

Problem related to the registry/NAND.

The autorun script encountered a load/run error.

WiFi related error.

Unable to find a bootable image.

The root file system has failed verification, which is used to detect whether the file
system has been tampered with. You can recover a unit that is showing this error code
by performing an update using safe mode.

Boot loader failure.

Table 10. Update (Upd) LED Descriptions

Update LED (number

of flashes)

Description

Erase failed.

Write failed.

Verify failed.

Failed to find UBI partition.

Attempt to write unsigned CFE to unit with secure boot enabled.

Failed to find UBI partition.

Failed to create/attach UBI partition.

Unexpected error.

Upgrade script exited abnormally.

Upgrade took longer than expected.

Update completed but update file could not be deleted.

10 of 68

Содержание StadiumVision SV-4K










































































Результаты поиска

Содержание StadiumVision SV-4K

Отзывы:

Похожие инструкции для StadiumVision SV-4K

Бренды по названию

Популярные бренды

Cisco StadiumVision SV-4K, Руководство по развертыванию

Результаты поиска

Содержание StadiumVision SV-4K

Отзывы:

Похожие инструкции для StadiumVision SV-4K

Бренды по названию

Популярные бренды