manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Руководство администратора

Поделиться
Скачать
Cisco Small Business 300 1.1 Series Скачать руководство пользователя страница 683

CDP Commands

78-20269-01 Command Line Interface Reference Guide

685

45

 

•

0 - The CDP packets transmitting through this port would contain Appliance 
VLAN-ID TLV with value of 0. VoIP and related packets are expected to be 
sent and received with VLAN-id=0 and an 802.1p priority. 

•

1..4094 - The CDP packets transmitting through this port would contain 
Appliance VLAN-ID TLV with N. VoIP and related packets are expected to 
be sent and received with VLAN-ID=N and an 802.1p priority.

•

4095 - The CDP packets transmitting through this port would contain 
Appliance VLAN-ID TLV with value of 4095. VoIP and related packets are 
expected to be sent and received untagged without an 802.1p priority.

•

4096 - The CDP packets transmitting through this port would not include 
Appliance VLAN-ID TLV; or, if the VVID is not supported on the port, this MIB 
object will not be configurable and will return 4096.

Example 

console(conf) 

cdp appliance-tlv enable

45.6

cdp mandatory-tlvs validation

Use the cdp mandatory-tlvs validation Global Configuration mode command to 
validate that all mandatory (according to CDP protocol) TLVs are present in 
received CDP frames. The no format of this command disables the validation.

If the mandatory TLVs are not included in the packet, it is deleted.

Syntax

cdp mandatory-tlvs validation

no cdp mandatory-tlvs validation

Parameters

N/A

Default Configuration 

Enabled.

Command Mode 

Global Configuration mode

Содержание Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды