Cisco Small Business 300 1.1 Series, Руководство администратора

Страница: 632 / 706

Smartport Commands
78-20269-01 Command Line Interface Reference Guide 634
43
Command Mode
Interface Configuration mode (Ethernet Interface, Port Channel)
User Guidelines
A Smartport’s persistent interface retains its dynamic configuration in the
following cases: link down/up, the attaching device ages out, and reboot. Note that
for persistence and the Smartport configuration to be effective across reboot, the
Running Configuration file must be saved to the Startup Configuration file.
Example
The example establishes two port ranges and makes one persistent and the other
not.
console(config)# interface range gi1-2
console(config-if-range)# macro auto persistent
console(config-if-range)# exit
console(config)# interface range gi3-4
console(config-if-range)# no macro auto persistent
43.6 macro auto smartport type
The macro auto smartport type Interface Configuration mode command manually
(statically) assigns a Smartport type to an interface. The no format of the
command removes the manually-configured type and returns it to default.
Syntax
macro auto smartport type
smartport-type
[
parameter-name value
[ parameter-name value [ parameter-name value ]]]
no macro auto smartport type
Parameters
smartport type
smartport-type
—Smartport type.
parameter-name value
—Specifies the parameter name and its value (Range:
printer, desktop, guest, server, host, ip_camera, ip_phone, ip_phone_desktop,
switch, router or wireless access point (ap)).