Cisco Small Business 300 1.1 Series, Руководство администратора

Страница: 29 / 706

Introduction
78-20269-01 Command Line Interface Reference Guide 30
1
NOTE
Range lists can contain either ports and port-channels or VLANs. Combinations of
port/port-channels and VLANs are not allowed
The space after the comma is optional.
When a range list is defined, a space after the first entry and before the comma (,)
must be entered.
A sample of this command is shown in the example below:
Keyboard Shortcuts
The CLI has a range of keyboard shortcuts to assist in editing the CLI commands.
The following table describes the CLI shortcuts.
console#configure
cconsole(config-if)#interface range gi1-5, vlan 1-2
Keyboard Key
Description
Up-arrow Recalls commands from the history buffer,
beginning with the most recent command. Repeat
the key sequence to recall successively older
commands.
Down-arrow Returns the most recent commands from the
history buffer after recalling commands with the
up arrow key. Repeating the key sequence will
recall successively more recent commands.
Ctrl+A Moves the cursor to the beginning of the
command line.
Ctrl+E Moves the cursor to the end of the command line.
Ctrl+Z / End Returns back to the Privileged EXEC mode from
any configuration mode.
Backspace Deletes one character left to the cursor position.