manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Руководство администратора

Поделиться
Скачать
Cisco Small Business 300 1.1 Series Скачать руководство пользователя страница 137

Management ACL Commands

78-20269-01 Command Line Interface Reference Guide

138

9

 

9

Management ACL Commands

9.1

management access-list

The management access-list Global Configuration mode command configures a 
management access list (ACL) and enters the Management Access-List 
Configuration command mode. Use the no form of this command to delete an ACL

Syntax

management access-list 

name

no management access-list 

name

Parameters

name—Specifies the ACL name. (Length: 1–32 characters)

Default Configuration

N/A

Command Mode

Global Configuration mode

User Guidelines

Use this command to configure a management access list. This command enters 
the Management Access-List Configuration mode, where the denied or permitted 
access conditions are defined with the deny and permit commands.

If no match criteria are defined, the default value is deny.

When re-entering the access-list context, the new rules are entered at the end of 
the access list.

Use the 

management access-class

 command to select the active access list.

The active management list cannot be updated or removed.

For IPv6 management traffic that is tunneled in IPv4 packets, the management ACL 
is applied first on the external IPv4 header (rules with the service field are 
ignored), and then again on the inner IPv6 header.

Содержание Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды