Cisco Small Business 200, Руководство администратора

Страница: 82 / 351

Administration: Time Settings
Configuring System Time
69 Cisco Small Business 200 Series Smart Switch Administration Guide
6
- From —Day and time that DST starts.
- To —Day and time that DST ends.
Selecting
Recurring
allows different customization of the start and stop of
DST:
• From —Date when DST begins each year.
-
Day
—Day of the week on which DST begins every year.
- Week —Week within the month from which DST begins every year.
-
Month
—Month of the year in which DST begins every year.
- Time —The time at which DST begins every year.
• To —Date when DST ends each year. For example, DST ends locally every
fourth Friday in October at 5:00 am. The parameters are:
- Day —Day of the week on which DST ends every year.
-
Week
—Week within the month from which DST ends every year.
- Month —Month of the year in which DST ends every year.
-
Time
—The time at which DST ends every year.
STEP 3
Click Apply . The system time values are written to the Running Configuration file.
Adding a Unicast SNTP Server
Up to 16 Unicast SNTP servers can be configured.
NOTE
To specify a Unicast SNTP server by name, you must first configure DNS server(s)
on the device (see
DNS Settings ). In order to add a Unicast SNTP server, check the
box to enable SNTP Client Unicast .
To add a Unicast SNTP server:
STEP 1
Click Administration > Time Settings > SNTP Unicast .
This page contains the following information for each Unicast SNTP server:
• SNTP Server —SNTP server IP address. The preferred server, or hostname,
is chosen according to its stratum level.