44
Troubleshooting
SE680 WiMAX / engbt / SE680_FUG_EN-7 / Appendix.fm / 13.5.11
Schablo
ne 2005_05_
02
Configuring the Web browser
If you are using a current Web browser but cannot open the configuration program in
it, check the Web browser settings.
Do not use an HTTP proxy for accessing your SE680 WiMAX modem.
Popup windows must be enabled for your SE680 WiMAX modem.
The following descriptions relate to Internet Explorer Version 7.0 and Mozilla Firefox
Version 3.0.
Setting up an HTTP proxy
An HTTP proxy is a buffer for Internet pages that have been called up. For example,
once called up, a page can continue to be shown even if you are currently offline. How-
ever, this buffer would prevent the configuration pages being read again when you call
up the configuration for your SE680 WiMAX modem; for this reason, your SE680
WiMAX modem can only be configured if the HTTP proxy is not being used for local
pages.
Check the HTTP proxy in the Web browser you wish to use for the configuration.
Internet Explorer 7.0:
Open Internet Explorer.
Click on
Tools
and then on
Internet Options
.
Open the
Connections
tab.
Click on
LAN settings
.
If the option
Use proxy server for LAN
is activated in the
Proxy server
area, acti-
vate the selection field
Circumvent proxy server for local addresses
. If the
option
Use proxy server for LAN
is not activated, you do not need to make any
settings.
Click on
OK
and then
OK
again to close the
Internet Options
window.
Firefox 3.0:
Open Firefox.
Click on
Tools
and then on
Settings
.
Click on
Advanced
.
Open the
Network
tab and click on
Settings
in the
Connection
area.
Select either
No proxy
or
Manual proxy configuration
. If you have chosen
Man-
ual proxy configuration
, in the
No proxy for:
field, enter the IP block in which the
IP address of your SE680 WiMAX modem is found:
192.168.2.0/24
Click on
OK
and then
OK
again to close the
Settings
window.
i
We recommend Microsoft Internet Explorer Version 7.0 or Mozilla
Firefox 3.0 as the Web browser.
Содержание SE680 WiMAX
Страница 2: ......